Powered by Shandong Unique International Trade Co.,Ltd

1) The use load must meet the following requirements https://www.3plyplywood.com

(1) The load on the working surface (including scaffolding boards, personnel, tools and materials, etc.), when the design is not specified, the masonry work frame load shall not exceed 3kN/㎡, and the other main structural engineering workload shall not exceed 2kN/㎡, The load of decoration work shall not exceed 2kN/㎡, and the load of protection work shall not exceed 1kN/㎡. www.3plyplywood.com

(2) The load on the work surface should be evenly distributed to avoid excessive loads being concentrated together. www.3plyplywood.com

(3) The number of scaffolding layers and simultaneous working layers of ringlock scaffolding shall not exceed the regulations.

(4) The number of paving layers and load control of the transfer platform between the vertical transportation facilities (Tic Tac Toe, etc.) and the ringlock scaffold shall not exceed the requirements of the construction organization design, and the number of paving layers and excessive stacking of construction materials shall not be arbitrarily increased.

Unique

(5) Lining beams, fasteners, etc. should be installed along with the transport, and shall not be stored on the ringlock scaffolding. https://www.3plyplywood.com

(6) Heavier construction equipment (such as electric welders, etc.) shall not be placed on the ringlock scaffolding.

Unique

2) The basic components and connecting wall parts of the scaffold shall not be dismantled arbitrarily, and various safety protection facilities of the scaffold shall not be dismantled arbitrarily.

3) Basic rules for the correct use of disc scaffolding

(1) The materials on the working surface should be cleaned up in time to keep the working surface tidy and unobstructed. Do not place tools and materials randomly, so as not to affect the work safety and cause falling objects and hurt people.
(2) At the end of each work, the materials on the shelf have been used up, and the unused ones should be stacked neatly.
(3) When performing operations such as prying, pulling, pushing, and pushing on the working surface, take the correct posture, stand firm or hold a firm support, so as not to lose stability or throw things out when the force is too strong.
(4) When electric welding is performed on the working surface, reliable fire prevention measures should be taken.
(5) When working on the rack after rain or snow, the snow and water on the working surface should be removed to prevent slipping.
(6) When the height of the working surface is not enough and needs to be raised, a reliable method of raising shall be adopted, and the height of raising shall not exceed 0.5m; when it exceeds 0.5m, the paving layer of the shelf shall be raised according to the erection regulations.

Shandong Unique International Trade Co.,Ltd

(7) Vibrating operations (rebar processing, wood sawing, placing vibrators, throwing heavy objects, etc.) are not allowed on the disc-buckle scaffolding.
(8) Without permission, it is not allowed to pull wires and cables on the buckle scaffolding, and it is not allowed to use open flames on the buckle scaffold. Copyright © Shandong Unique International Trade Co.,Ltd All Rights Reserved.